Perform a Water Leak Test

Press Enter to show all options, press Tab go to next option

How to Perform a Leak Test

Use the guidelines below to determine if water is leaking somewhere on your property. Repairs of leaks on the property owner's side of the water meter are the responsibility of the property owner. If you do establish that you have had a leak, you may qualify for a credit on the sewer portion of your bill.

  1. Be sure no water is being used while you perform this test.

  2. Locate the meter and record the meter reading.

  3. Take a few moments and observe the meter. Neither red dial should be moving. If either dial is moving, water is flowing through the meter.

  4. Do not run any water for at least a two hour period. Then recheck the meter reading and record. The reading should be the same. If the meter has moved, this suggests a possible leak.

    1st Reading_______________________

    2nd Reading_______________________